Water hardness in Delran, New Jersey
HardBurlington County · Delaware/Western System
Is the water in Delran, NJ hard?
Yes — tap water in Delran, New Jersey measures 7.5 grains per gallon (128 mg/L), which the USGS scale classifies as hard. The figure comes from NJ American Water CCR (2025 CCR (PWS ID NJ0327001, Western System)).
Want to know what your own tap reads? A licensed Burlington County provider will test Delran water free and price a fix if one is warranted.
Schedule a consultationHardness in Delran is reported at 7.5 gpg (128 mg/L), placing the town in the hard band. Expect visible scale on fixtures, spotting on dishes, and shortened service life on water heaters that are never flushed. Ion-exchange softening is generally worth considering at this level.
Source: NJ American Water CCR (2025 CCR (PWS ID NJ0327001, Western System)), issued by Delaware/Western Service System for its Burlington County customers.
Hardness at a glance
| Hardness (grains per gallon) | 7.5 |
|---|---|
| Hardness (mg/L as CaCO₃) | 128 |
| Classification | Hard |
| Water system | Delaware/Western System |
| Source | NJ American Water — Delaware/Western System, 2025 CCR (PWS ID NJ0327001). |
Figures read from NJ American Water — Delaware/Western System, 2025 CCR (PWS ID NJ0327001).
What supplies Delran
Water reaching Delran taps is treated by Delaware/Western System. Its published hardness is 7.5 gpg, measured at the plant and entry points rather than street by street. That is why 7 other New Jersey municipalities publish the same number.
See the full Delaware/Western System water quality report for the complete panel — sodium, chloride, sulfate, fluoride, manganese, iron, pH and total dissolved solids — plus every other town on the system.
Data note: Hardness updated from 2025 CCR (128 mg/L / 7.48 gpg) -- supersedes earlier 100 mg/L compiled figure
Questions people ask
- How hard is the water in Delran, NJ?
- Delran water measures 7.5 grains per gallon (128 mg/L as calcium carbonate), which is classified as hard.
- Do I need a water softener in Delran?
- Ion-exchange softening is generally worth considering at this level. Expect visible scale on fixtures, spotting on dishes, and shortened service life on water heaters that are never flushed.
- Where does Delran water come from?
- Delran is supplied by Delaware/Western Service System, in Burlington County, New Jersey. The hardness figure above is taken from NJ American Water CCR (2025 CCR (PWS ID NJ0327001, Western System)).
- What is 7.5 grains per gallon in mg/L?
- 7.5 gpg equals about 128 mg/L (or ppm) of hardness as calcium carbonate. One grain per gallon is 17.1 mg/L.
- What is the pH of Delran tap water?
- NJ American Water CCR (2025 CCR (PWS ID NJ0327001, Western System)) lists pH at 6.95 to 7.8.
Solutions for Delran
Delran's reading of 7.5 grains per gallon puts it in hard territory. An ion-exchange softener is generally the better fit than a conditioner at this level, because it removes the calcium and magnesium rather than converting them, which is what prevents scale in the water heater as well as on fixtures. A conditioner still helps if brine discharge is restricted or there is no drain nearby.
Where Delran housing predates modern plumbing, scale costs more: galvanised and narrow copper runs lose bore as deposits build, while PEX and wider copper tolerate the same water for longer. The age of the pipe, not only the number, sets the urgency.
Hardness in Delran is not a fixed number through the year — a utility figure is an annual average, and demand, source switching and temperature all shift it. If a reading at your tap differs from 7.5 gpg, the season it was taken in explains part of the gap.
The honest comparison is annual, not one-off. Salt, regeneration water and a service call are recurring; the saving shows up as a water heater that lasts its rated life and fixtures that do not need replacing early. At 7.5 gpg those two columns are close enough that the state of your heater usually settles it.
For the mechanics behind that, what hard water actually is covers the units and scale chemistry, and the Learn hub compares softeners against conditioners in detail.
Beyond hardness: skin, hair and laundry in Delran
7.5 gpg puts Delran in the hard band, which is the range where residents most often report soap that will not lather, a film after showering and stiff towels. The mechanism is documented — calcium and magnesium react with soap to form an insoluble scum that stays on skin, hair and fabric — while the dermatological picture is less settled.
The clearest evidence is on eczema: the SWET trial found installing a softener did not improve eczema severity in children, so relief from itch is something many people report rather than something trials confirm. Laundry and lather effects, by contrast, are straightforward chemistry at 7.5 gpg.
For the full breakdown, read what hard water does to skin and hair, which sets out the sources behind it.
Size a softener for Delran water
At 7.5 gpg, sizing depends on household occupancy and peak flow as much as on the hardness figure. A consultation covers both.
Other towns on Delaware/Western System
These municipalities are supplied by the same system as Delran, so they publish the same hardness reading. Their pages differ in what is local to each town.
- Audubon water hardness — 7.5 gpg, hard7.5 gpg
- Audubon Park water hardness — 7.5 gpg, hard7.5 gpg
- Barrington water hardness — 7.5 gpg, hard7.5 gpg
- Beverly water hardness — 7.5 gpg, hard7.5 gpg
- Cinnaminson water hardness — 7.5 gpg, hard7.5 gpg
- Delanco water hardness — 7.5 gpg, hard7.5 gpg
- Edgewater Park water hardness — 7.5 gpg, hard7.5 gpg
- Gibbsboro water hardness — 7.5 gpg, hard7.5 gpg
- Haddon Heights water hardness — 7.5 gpg, hard7.5 gpg
- Haddonfield water hardness — 7.5 gpg, hard7.5 gpg
- Hi-Nella water hardness — 7.5 gpg, hard7.5 gpg
- Laurel Springs water hardness — 7.5 gpg, hard7.5 gpg
- Lawnside water hardness — 7.5 gpg, hard7.5 gpg
- Lindenwold water hardness — 7.5 gpg, hard7.5 gpg
Elsewhere in Burlington County
Neighbouring municipalities, several of them on different supplies — a town three miles from Delran can report a very different figure.
- Eastampton water hardness — 6.9 gpg, moderately hard6.9 gpg
- Hainesport water hardness — 6.9 gpg, moderately hard6.9 gpg
- Lumberton water hardness — 6.9 gpg, moderately hard6.9 gpg
- Mansfield water hardness — 18.9 gpg, very hard18.9 gpg
- Mount Holly water hardness — 6.9 gpg, moderately hard6.9 gpg
- Palmyra water hardness — 7.5 gpg, hard7.5 gpg
- Riverside water hardness — 7.5 gpg, hard7.5 gpg
- Riverton water hardness — 7.5 gpg, hard7.5 gpg
- Southampton water hardness — 7 gpg, hard7 gpg
- Vincentown water hardness — 7 gpg, hard7 gpg
- Westampton water hardness — 6.9 gpg, moderately hard6.9 gpg
Towns reporting a similar figure to Delran
Municipalities elsewhere in New Jersey, on unrelated systems, that report hardness within about 1.5 grains per gallon of Delran's 7.5 gpg.
- Cherry Hill water hardness — 7.5 gpg, hard7.5 gpg
- Bridgeport water hardness — 7.4 gpg, hard7.4 gpg
- Logan Township water hardness — 7.4 gpg, hard7.4 gpg
- Repaupo water hardness — 7.4 gpg, hard7.4 gpg
- Essex Fells water hardness — 7.6 gpg, hard7.6 gpg
- Roseland water hardness — 7.6 gpg, hard7.6 gpg
- Paramus water hardness — 8 gpg, hard8 gpg
- Harrison water hardness — 8.2 gpg, hard8.2 gpg
How Delran compares statewide
Against the 160 New Jersey municipal records published here, Delran's 7.5 gpg sits between the two extremes: East Orange, the hardest reading in the state at 25.9 gpg, and Bloomfield at 2.6 gpg. The Burlington County hardness table ranks Delran against its immediate neighbours, and the statewide data table sorts every record by figure, class or water system.
Hardness is a nuisance parameter, not a regulated health contaminant. Read how the scale works, see water hardness across New Jersey or check how these figures are sourced.