Bloomfield Township municipal system water quality

Slightly Hard1 municipality · Essex

Bloomfield Township municipal system reports water hardness of 2.6 grains per gallon — 44 mg/L as calcium carbonate, slightly hard on the USGS scale. Because the reading is taken on finished water leaving treatment, it is the figure for all 1 town on this system rather than for any one of them.

Reported panel

Reported water quality figures for Bloomfield Township municipal system
Hardness (grains per gallon)2.6
Hardness (mg/L as CaCO₃)44
ClassificationSlightly Hard
pHNot reported
Total dissolved solidsNot reported
Disinfectant residualNot reported
SodiumNot reported
ChlorideNot reported
SulfateNot reported
FluorideNot reported
ManganeseNot reported
IronNot reported

Source: Bloomfield Twp CCR 2024 — Bloomfield Township municipal system, CCR.

Municipalities on this system

Questions people ask

How hard is Bloomfield Township municipal system water?
Bloomfield Township municipal system reports hardness of 2.6 grains per gallon (44 mg/L as calcium carbonate), which the USGS scale classifies as slightly hard. The figure is a system-wide reading and applies to every municipality on the system.
Which towns are served by Bloomfield Township municipal system?
1 municipalities on file are served by Bloomfield Township municipal system, across Essex County: Bloomfield.
Why do towns on Bloomfield Township municipal system publish the same hardness number?
Hardness is measured at the treatment plant and at entry points to distribution, not street by street. Every town buying finished water from Bloomfield Township municipal system therefore reports the same value.
How much sodium is in Bloomfield Township municipal system water?
Bloomfield Township municipal system has not published a sodium figure in the report on file. Anyone on a sodium-restricted diet should request the current year's report from the utility directly.
Do I need a water softener on Bloomfield Township municipal system water?
At 2.6 gpg the hardness figure alone does not justify a softener.

Get your own tap tested

System-wide figures describe finished water leaving the plant. A test at your own tap is what tells you the hardness, iron and pH your plumbing actually sees.

No cost, no obligation. We pass your request to one licensed local provider.

Hardness is a nuisance parameter, not a regulated health contaminant. See the Learn hub for treatment comparisons, or how these figures are sourced.