Deep Run System water quality
Moderately Hard1 municipality · Monmouth
Deep Run System reports water hardness of 5.6 grains per gallon — 96 mg/L as calcium carbonate, moderately hard on the USGS scale. Because the reading is taken on finished water leaving treatment, it is the figure for all 1 town on this system rather than for any one of them.
Reported panel
| Hardness (grains per gallon) | 5.6 |
|---|---|
| Hardness (mg/L as CaCO₃) | 96 |
| Classification | Moderately Hard |
| pH | Not reported |
| Total dissolved solids | Not reported |
| Disinfectant residual | Not reported |
| Sodium | Not reported |
| Chloride | Not reported |
| Sulfate | Not reported |
| Fluoride | Not reported |
| Manganese | Not reported |
| Iron | Not reported |
Source: NJ American Water — Deep Run System, CCR.
Municipalities on this system
Questions people ask
- How hard is Deep Run System water?
- Deep Run System reports hardness of 5.6 grains per gallon (96 mg/L as calcium carbonate), which the USGS scale classifies as moderately hard. The figure is a system-wide reading and applies to every municipality on the system.
- Which towns are served by Deep Run System?
- 1 municipalities on file are served by Deep Run System, across Monmouth County: Cream Ridge.
- Why do towns on Deep Run System publish the same hardness number?
- Hardness is measured at the treatment plant and at entry points to distribution, not street by street. Every town buying finished water from Deep Run System therefore reports the same value.
- How much sodium is in Deep Run System water?
- Deep Run System has not published a sodium figure in the report on file. Anyone on a sodium-restricted diet should request the current year's report from the utility directly.
- Do I need a water softener on Deep Run System water?
- At 5.6 gpg, softening is optional — a maintenance and comfort decision rather than a necessary one.
Get your own tap tested
System-wide figures describe finished water leaving the plant. A test at your own tap is what tells you the hardness, iron and pH your plumbing actually sees.
Hardness is a nuisance parameter, not a regulated health contaminant. See the Learn hub for treatment comparisons, or how these figures are sourced.