Four Seasons at Chester System water quality
Very Hard1 municipality · Morris
Four Seasons at Chester System reports water hardness of 18.3 grains per gallon — 313 mg/L as calcium carbonate, very hard on the USGS scale. Because the reading is taken on finished water leaving treatment, it is the figure for all 1 town on this system rather than for any one of them.
Reported panel
| Hardness (grains per gallon) | 18.3 |
|---|---|
| Hardness (mg/L as CaCO₃) | 313 |
| Classification | Very Hard |
| pH | Not reported |
| Total dissolved solids | Not reported |
| Disinfectant residual | Not reported |
| Sodium | Not reported |
| Chloride | Not reported |
| Sulfate | Not reported |
| Fluoride | Not reported |
| Manganese | Not reported |
| Iron | Not reported |
Source: NJ American Water — Four Seasons at Chester System, CCR.
Municipalities on this system
Questions people ask
- How hard is Four Seasons at Chester System water?
- Four Seasons at Chester System reports hardness of 18.3 grains per gallon (313 mg/L as calcium carbonate), which the USGS scale classifies as very hard. The figure is a system-wide reading and applies to every municipality on the system.
- Which towns are served by Four Seasons at Chester System?
- 1 municipalities on file are served by Four Seasons at Chester System, across Morris County: Four Seasons at Chester.
- Why do towns on Four Seasons at Chester System publish the same hardness number?
- Hardness is measured at the treatment plant and at entry points to distribution, not street by street. Every town buying finished water from Four Seasons at Chester System therefore reports the same value.
- How much sodium is in Four Seasons at Chester System water?
- Four Seasons at Chester System has not published a sodium figure in the report on file. Anyone on a sodium-restricted diet should request the current year's report from the utility directly.
- Do I need a water softener on Four Seasons at Chester System water?
- At 18.3 gpg, softening is normally recommended to protect the water heater and appliances.
Get your own tap tested
System-wide figures describe finished water leaving the plant. A test at your own tap is what tells you the hardness, iron and pH your plumbing actually sees.
Hardness is a nuisance parameter, not a regulated health contaminant. See the Learn hub for treatment comparisons, or how these figures are sourced.